What is aluminum tooling plate?
About Aluminum Cast Tool and Jig Plates. Tool and Jig plate is a machined product, with flat surfaces and a surface finish equal to 32 micro-inches or better on both sides (top and bottom). It is readily machined with very little distortion.
What is mic6?
Overview. Aluminum MIC-6 is cast plate known for its stability and consistency between plates. It has superior flatness and dimensional tolerances on the thickness which makes it popular for tooling and base plates. Aluminum MIC-6 is a registered trademark of Alcoa.
Who makes mic6?
Alcoa
Mic-6 is a 7000 series base alloy by Alcoa (which used to be known as Alumax). It is a stable tooling plate that is manufactured to ensure consistency between plates.
What grade of aluminum is MIC-6?
7xxx series
Considered a 7xxx series aluminum grade as Zinc is the main alloying element. Mic6 comes with both sides machined to a surface finish of 20 RMS or better and to a thickness tolerance of +/-….Mic 6 Cast Aluminum Plate.
| Mechanical Properties | |
|---|---|
| Tensile Strength | 25 ksi |
| Yield Point | 15 ksi |
| Elongation 2″ % | 3 |
| Hardness Brinell | 65 |
What is 5000 series aluminum used for?
5000 Series aluminum is mixed with magnesium (different than manganese) and has both a high tensile strength and formability; hence it is widely used in fabrication such as transportation, tanks, vessels and bridges.
What is cast aluminum?
What is Cast Aluminum? Cast aluminum is created when aluminum is heated to extremely high temperatures. The molten aluminum is then molded into a shape and cooled to craft a wide variety of products.
Is mic6 a ground?
The manufacturing process of Mic-6® is unique. The state-of-the-art process begins by casting the plates continuously and to a near net thickness. Lastly, each plate is then surface ground from the near net thickness to the final thickness. The end result is a pristine, flat, and stable cast tool and jig plate.
What is k100 aluminum?
The K100S cast tool and jig aluminum plate is a product that is produced using aluminum alloy that is fine-grained. Internally, this grade of aluminum is stable, which ensures that little to no movement is done during machining. This is a machined product that comes with a flat surface.
What is K100 aluminum?
Can you weld MIC6 aluminum?
Aluminum filler alloys 4043, 4145 and 5356 are all accept- able for use when welding MIC6. In general, it is recommended to weld the MIC6 at interpass temperatures not exceeding 150 °F (66 °C). If a pre-heat is required, the temperature should be limited to 250 °F (120 °C).
What kind of plate is aluminum tool and jig?
Aluminum Cast Tool & Jig (ATP 5) plate is vertical cast, stress-relieved, machined plate providing sound dimensional stability with minimal or no distortion even after extensive machining operations.
What do you use aluminum tooling plates for?
These plates have three T-slots for use with T-slot nuts, bolts, and setup studs. There is a slot along each side of the plate for mounting with clamps. Aluminum plates are lightweight and have mild corrosion resistance. For technical drawings and 3-D models, click on a part number.
What kind of plate is 6 series aluminum?
The 6 series aluminum plate is an extruded alloy aluminum plate with Mg-Si elements added. 6061 aluminum tooling plate is one of the most commonly used products in the 6 series aluminum tool plate, which is usually used in mold manufacturing. 6061 aluminum tooling plate is a medium-thick aluminum plate with superior performance.
What can you use a ATP 5 tooling plate for?
ATP 5 cast tooling plate applications include, but are not limited to, Computer & Electronics, Pharmaceuticals, Machining fixtures, Drill jigs, Index tables, Semi-Conductor, Automotive Molds. Band saw cut Circles now available! Click Here: Circle Cut Cast Plate