Categories :

What is a Yankee cut sail?

What is a Yankee cut sail?

What is a Yankee sail? A Yankee sail is a jib with a high-cut clew of about 3′ above the boom. A higher-clewed jib is good for reaching and is better in high waves, preventing the waves crash into the jibs foot. Yankee jibs are mostly used on traditional sailboats.

What is a staysail used for?

The staysail plays three roles: It augments sail power. It helps break down total sail area into smaller working components for ease of handling. The smaller sail units allow for different combinations, giving sailors a variety of options for different conditions.

What is a staysail on a yacht?

A staysail (“stays’l”) is a fore-and-aft rigged sail whose luff can be affixed to a stay running forward (and most often but not always downwards) from a mast to the deck, the bowsprit, or to another mast (the mast is item 13 in the illustration right).

What is the difference between a staysail and a jib?

is that staysail is (nautical) a fore-and-aft rigged sail whose luff can be affixed to a stay running forward from a mast to the deck, the bowsprit or to another mast while jib is (nautical) usually with a modifier, any of a variety of specialty triangular staysails set forward of the foremast.

What is a Code 0 sail?

A code zero is strictly a downwind sail. A code zero is often classified as a spinnaker in terms of racing, hence the restriction on the length of the mid-girth, but it’s not a true downwind sail. If you’re going downwind, you’ll use either a symmetrical or asymmetrical spinnaker.

What is the best sail shape?

The best shape for acceleration has the draft fairly far forward. Upwind — When a boat is sailing into the wind, you want sails that are relatively flat. Flatter sails reduce drag when sailing upwind and also allow you to point a little closer to the wind.

Why is it called a staysail?

A bit of trivia: The Dazy staysail is named after the boat that popularized it. On her way to winning the 1975 Canada’s Cup, GOLDEN DAZY used a tall narrow staysail.

What is a Solent stay?

The Solent stay is an inner fore-stay that provides an alternative to the Sta-sail stay. Its benefits, similar to that of the Sta-sail Stay, are to provide an inner stay that can fly a smaller/ heavier headsail without having to unfurl, douse and change out the boats everyday headsail.

What does jib stand for?

A jib is a sail at the front of a sailboat. Jib is also a verb, meaning “move to the opposite side of the ship” or “refuse to follow instructions.” The old-fashioned compliment “I like the cut of your jib,” or “I like the way you look,” comes from nautical slang, in which jib meant “face.”

What is a code 3 sail?

Code 3 is a medium air reaching sail, used for apparent wind angles near 90 degrees. Code 4 is a heavy air running sail, used in the heaviest winds normally expected. Code 5 is a heavy air reaching sail, used in the heaviest winds normally expected. Code 6 is a storm sail, for running in storm conditions.

What is the difference between a code 0 and a gennaker?

A Code 0, for example, is a gennaker, but a Code 0 is a racing sail, while a gennaker is usually considered a cruising sail. Ultimately, there are four or five different types of asymmetrical spinnakers, with each sail designed for a specific wind angle range. As such it will also be similar to a reaching gennaker.

What’s the difference between a boom vang and a cunningham?

1. A boom downhaul is used on a boom that connects/attaches to a track mounted gooseneck, track is mounted to the mast. 2. A cunningham is used on a gooseneck that is direct attached to a mast (no track to slide up and down on)…

What kind of jib does a Yankee sail use?

What is a Yankee sail? A Yankee sail is a jib with a high-cut clew of about 3′ above the boom. A higher-clewed jib is good for reaching and is better in high waves, preventing the waves crash into the jibs foot.

Can You Fly a Yankee on a baby stay?

You can also fly a yankee on the main forestay and a staysail on the baby stay creating a slot between the sails. This is a very efficient sail configuration and we find that the staysail adds more than a knot to our boat speed in almost any wind conditions. The baby stay can also serve to fly a hanked on storm sail.

What kind of SAIL does a forestay sail?

The sail plan forward then offers four configuration options. The forestay can fly a jib, a yankee (cut higher on the foot than a jib or genoa), a larger genoa, or a spinnaker. The baby stay can fly a staysail or a storm jib – both hanked on unless you have roller furling on the babystay.

How are specialty sails used in a boat?

Specialty sails (just a name I came up with) each have different functionalities and are used for very specific conditions. So they’re not always up, but most sailors carry one or more of these sails. They are mostly attached in front of the headsail, or used as a headsail replacement.