Categories :

What pickup does Eric Johnson use?

What pickup does Eric Johnson use?

Signature Stratocaster
Eric Johnson Signature Stratocaster® Pickups.

What height do you set humbucker pickups?

For standard, full-size humbuckers, a reasonable starting point for the bridge pickup is at least 1/16″ (1.5mm) from the high E and 5/64″ (2 mm) from the low E. There are no recommended distances for the other 4 strings.

How do you tell if your pickups are too high?

Setting your pickup height too high will cause your magnets to push and pull your strings out of tune. Here’s a quick way to tell if this is happening to you: play the Low E string at a high fret (15th fret is a good one to start at). You might hear a “warbling” sound. That sound is your magnet fighting your string.

How do you get Eric Johnson’s tone?

Several details are crucial for generating Johnson’s violin-like tone, including turning the amp’s presence and treble controls all the way down, using a Y-cable to access both channels turned all the way up and dialing in the Tube Driver (still made today by B.K.

What are the best Stratocaster pickups?

12 Best Stratocaster Pickup Reviews and the Best Stratocaster Pickup Brands

  • Fender Strat Hot Noiseless Pickups.
  • Fender Tex-Mex Strat Pickups.
  • Seymour Duncan California ’50s Strat Pickup Set.
  • Fender Pure Vintage ’65 Strat Pickup.
  • Seymour Duncan STK-S4n Classic Stack Plus –Neck Pickup.

What happens if your pickups are too high?

Setting Pickup Height Too High: Setting your pickup height too high will cause your magnets to push and pull your strings out of tune. Here’s a quick way to tell if this is happening to you: play the Low E string at a high fret (15th fret is a good one to start at). You might hear a “warbling” sound.

Does pickup height affect volume?

Yes, pickup height significantly affects volume. Pickup height affects volume, tone, string-to-string balance, and possibly intonation and sustain (if too close).

What gauge strings Eric Johnson?

Gauges: 10-13-18-26-38-50. Eric’s signature Nickel Rockers guitar strings feature a round, pure nickel cover that is slightly flattened by metal rollers during the winding process. Bright-sounding, great-feeling strings. GHS has made the highest-quality strings since 1964.

Does Eric Johnson use reverb?

For his clean rhythm sound, Johnson has long used a pair of Fender Twin Reverb amps. Typically he uses heads, which he connects up to a 4 x 12″ Marshall cabinet. Until recently, he used a 1968 Marshall Plexi amp for his dirty rhythm sound.

What’s the middle pickup on an Eric Johnson guitar?

Eric sets the bridge pickup closer to the strings. The center polepieces on the bridge pickup are also pushed down to reduce the arc of the polepieces The neck pickup is 10/64″ from the strings. The middle pickup is 12/64″ from the strings on the treble side and 10/64″ on the bass side.

What kind of Springs does Eric Johnson use?

Here Eric uses a brass saddle to fatten up its sound. The four tremelo springs (set three on the bass side and one on the treble side) are tensioned just enough to keep the bridge resting against the body of the guitar, ensuring maximum transference of string energy.

When did Gary Brawer take measurements of Eric Johnson’s guitar?

My article on Eric Johnson’s setup secrets from a while ago proved quite popular. This article is a more detailed follow-up. In 2001, top-notch guitar repairman Gary Brawer took some careful measurements of Eric Johnson’s beloved ’58 Stratocaster. These were his findings:

What kind of magnets are in Eric Johnson neck pickups?

Here’s the description and the specs… Neck pickup based on the 54 single coil with oversized Alnico 3-magnets. Middle pickup is based on a 63 strat single coil with specially treated Alnico magnets and is “reverse” wound.