What is HTH Ultra Clear used for?
A 2L bottle used as a monthly treatment that kills algae and prevents further growth. Also includes a sparkle clarifier to keep your pool clean. For a clean, crystal blue, and bacteria-free pool, try the HTH Ultra Clear Algaecide….HTH Ultra Clear Algaecide 2L.
How use HTH ultra clear Duo?
With the pump on the filter position and add one bottle of HTH® Ultra Duo around the sides of the pool. The following morning, brush down the walls of the pool. In the case of severe algae, shock treat in the early evening with 3 cups of HTH® Granular + mineralsoft or 1 sachet of HTH® Shock It®.
How do you use HTH clear?
Use HTH® Super Clarifier for Crystal Clear Water Use HTH® Super Clarifier to remove dead algae and organic debris for crystal clear water. The concentrated formula is easy to use. Just dilute with pool water and pour along the sides of the pool and into the skimmer. After 8 hours, vacuum the pool.
Is algaecide the same as algae guard?
Algaecides work with chlorine in the water to kill algae cells. However, HTH Super Algae Guard can be used for green, black or yellow algae. The best time to use an algaecide is before you have a problem as it is easier and less time consuming to prevent algae than to kill it.
What is pool algaecide?
Liquid Algaecide is a strong algae depressant used for the prevention of algae growth and the maintenance of sparkling water in pools. Algae growth is the main cause of “off” colours in your swimming pool water. Prevention is important, regulated use of liquid algaecide will keep your water clear and shiny.
How long after HTH Can you swim?
How Long Do I Have To Wait To Swim After Adding Pool Chemicals? It is recommended to wait at least 20 minutes to an hour after adding water balancing chemicals. You should wait 2-4 hours (or one full cycle through the filter) to swim from the moment you use calcium chloride in your pool.
What is the fastest way to clear a green pool in South Africa?
Ninety percent of green water in a swimming pool can be sorted by shock treatment. Before treating your pool with any algaecide products it is recommended that you undertake a shock treatment. Clean out the pump and weir baskets, backwash for 2 minutes and rinse for 20 seconds. Test and correct the pH level.
Will acid clear a cloudy pool?
If there is a problem with the chlorine, pH or other chemical levels in your pool, adjusting those levels can be enough to correct the cloudiness. For example, if your pool water is too basic, you can add hydrochloric acid or sodium hydrogen sulfate to lower the pH.
What to add to clear a cloudy pool?
Answer: Try using chlorine bleach (liquid chlorine) instead of granulated chlorine; this will clear and help keep away algae from your pool. Free chlorine should always be at 3ppm to avoid algae and cloudy water.
What happens if you put too much algaecide in your pool?
The presence of too much algaecide can lead to a foamy pool water. Air pockets within the filter system can cause bubbles on the pool surface as well. The bubbles and foam resulting from too much algaecide will be much smaller in size.
Do I use shock or algaecide first?
While shocking and adding algaecide is effective in getting rid of algae, it should not be done together. This is because when you mix chlorine and algaecide together, it renders both of them useless. Hence, you should first shock the pool and wait for the chlorine levels to fall below 5 PPM.
What makes the HTH Ultra Shock so effective?
HTH Ultra Shock contains 52-percent calcium hypochlorite killing bacteria or algae quickly and hassle-free use. The fast-acting shock softens water and includes an enhanced clarification agent for maximum strength results. Conveniently designed for all pool surfaces.
What does HTH Super 3 chlorinating tablets do?
HTH ® Super 3″ Chlorinating Tablets are formulated with cyanuric acid (CYA) to help protect against chlorine loss, and they contain built-in algae protection and clarifier. 1. Test and Balance pH Levels First, make sure the pH of the water is balanced.
When to use HTH pool clarifier after shock treatment?
The clarifier gathers the tiny particles clouding your water, making it easier for your filter to remove them. This product does not affect the pool’s pH balance. For best results, use the clarifier 4 to 12 hours after each shock treatment, superchlorination or algaecide treatment to remove dead algae and organic debris from the pool water.
What does HTH Super 3 do for pool water?
HTH ® Super 3” Chlorinating Tablets keep your pool clean and clear with a 4-in-1 formula that sanitizes pool water and protects against chlorine loss due to sun exposure. This formula includes built-in algae protection and clarifier for an amazing value in DIY pool care.