Categories :

How do I reprogram my Nissan Intelligent Key?

How do I reprogram my Nissan Intelligent Key?

Nissan Intelligent Key Programming Instructions Insert the key into the ignition, but don’t start the car, then remove the key. Do this about six times, although it can take up to 10 times. When your car accepts the Key, the hazard lights will flash twice. Now you’re in program mode.

How do you start a Nissan without the intelligent key?

Getting into Your Nissan

  1. First, flip the key fob over, then push the small release latch.
  2. Pull out the hidden emergency key from the bottom of the fob.
  3. Insert the key in the driver’s side door and unlock it to enter.

Can you reprogram a Nissan key fob?

Reprogram Nissan Key Fob: Nissan Intelligent Key Insert the key into the ignition, but don’t start the car. Take the key out and repeat this step approximately six times. Keep in mind that it may take up to 10 times to be successful. The hazard lights will flash twice when the car accepts the Nissan Intelligent Key.

How much is a Nissan Intelligent Key?

As of today, 03/2017, 2017 Nissan Maxima Intelligent keys cost around $180.00. That is just for the key blank itself without any programing or other services. A regular transponder key for a 2006 Nissan Maxima costs about $50.00.

Can you start a keyless car with a key?

If your keyless entry works with a START button and there’s no mechanical key slot, there’s still a way to start the car. Use the key fob to push the START button. Some manufacturers have a backup system that allows this method to work if the key fob battery is dead.

How much does it cost to reprogram a Nissan key?

Call the dealer or locksmith – Explain to them you already have the key/remote and would like it to be cut and/or programmed. In addition, ask for the quote on this procedure. In addition, keep in mind, the process usually cost somewhere between $80-$150, depends on the type of key/remote you have.

How do I unlock my Nissan immobilizer?

If You have tripped the car’s alarm by accident, depress the fob’s panic or unlock button, to switch the alarm off. Alternatively, insert the key into the driver’s door to unlock and reset the immobilizer. You can also try pressing the panic button for 5 seconds followed by depressing the lock button 2 times.

Will a Nissan start without a key?

Along with accessing your vehicle without a key fob, you can also start and drive your Nissan until you replace the key fob batteries. The process of starting and operating your Nissan without the key fob may vary by model.

Can I start my Nissan Altima with a key?

Starting Your Nissan If your Nissan car, truck, or SUV has a key fob port, you can still put the fob in the port and tap the brake pedal or clutch as you press the START/STOP button. If your Nissan doesn’t have a port, just step on the brake or clutch as you press the key fob against the START/STOP button.

How do I fix my Nissan immobilizer?


  1. Leave the ignition switch in the ON position. for approximately 5 seconds.
  2. Turn the ignition switch to the OFF or LOCK. position, and wait approximately 10 seconds.
  3. Repeat steps 1 and 2.
  4. Restart the engine while holding the device.

How much is a new Nissan key?

A: In short, to replace a Nissan key usually cost between $130-$490.

How do you program the Nissan Intelligent Key?

When your car accepts the key, the hazard lights will flash twice. This puts the vehicle and key in program mode. Put the key back in the ignition and turn the key, without starting the vehicle, to activate the electronics. Immediately press any button on the Nissan Intelligent Key. This needs to be done quickly to be effective.

How does Nissan push button ignition system work?

There is no need to insert and turn the key, nor to operate a remote control. Push Button Ignition The engine activates just by turning the ignition knob (or pressing the engine start switch), without taking the key out and inserting it.

Where is the Intelligent Key on a door handle?

Hold Signal Tech-II and the Intelligent Key near a front door handle. NOTE: Do not press the buttons on the I-Key. 4. Repeatedly press the request switch (on the door handle) and observe the signal response outputs (relative signal strength) on the Signal Tech-II.

How does the intelligent key work on a power lock?

The power lock system relies on the Intelligent Key to transmit button operation to the remote keyless entry receiver to function. The remote keyless entry receiver receives each button operation signal and electronic key ID signal from the Intelligent Key and then transmits the signal to the BCM.