Do magnetic ballasts cause RF interference?
Another problem you won’t have with a magnetic ballast is radio frequency (RF) interference. On the other hand, electronic and digital ballasts give off RF interference, a problem old school technology doesn’t have. Magnetic ballasts tend to run as much as 30 per cent less efficiently, power wise.
How long does a 600 watt ballast last?
For optimum efficiency, you should replace your magnetic ballast every 2-3 years. Digital ballasts last much longer, and have a consistent output over their life. They only need replacing if they stop working, which can be 10+ years.
Do you need a ballast for 600w bulb?
For example, if using a 600w lamp, a 600w ballast should be used and don’t be tempted to run a 600w lamp with a 250w ballast, you’re asking for trouble. Check the compatibility of the reflector and your lamp/ballast before buying, and you’ll have one less thing to worry about.
Can I use a 600w bulb in a 1000w dimmable ballast?
Using it to dim down a bulb, for example to run a 1000w watt bulb at 600w, is not ideal. The better use is to dim the ballast down to 600w and then use it to run an actual 600w bulb. That is the big advantage of a dimmable ballast: it allows you to power bulbs of multiple wattages.
What are the disadvantages of magnetic ballast?
Some disadvantages of the inductive ballast are: they are less efficient than capacitive ballasts, they cost more, they weigh more, and they take up more space. Magnetic ballasts are typically used in reactors using medium pressure (MP) lamps.
What causes RF interference?
Radio Frequency (RF) interference is caused by transmitters on the same or similar frequency to the one you’re receiving — for example, baby monitors, cordless phones, amateur or personal radio transmitters, oscillating amplifiers (like audio or radiating aerial amplifiers).
How much power does a 600 watt digital ballast use?
645W
For example, a 600W Electronic ballast consumes 645W to deliver the same amount of lumens as a magnetic ballast which consumes 660W. This is a saving of 15W, so for every hour you run the system you would save £0.001 (based on a typical electricity price of £0.08 kW/h).
How long should a ballast last?
According to the Certified Ballast Manufacturers Association, the average magnetic ballast lasts about 75,000 hours, or 12 to 15 years with normal use. The optimum economic life of a fluorescent lighting system with magnetic ballasts is usually about 15 years.
How many amps is a 600 watt ballast?
Product Attributes
| Maximum Current | 2.73 Amps/5.46 Amps |
|---|---|
| Operates | 400W or 600W Lamps |
| Power Factor | 99% |
| Sold Separately | 240V Power Cord |
| THD | 10% |
Can you use a 600w bulb in a 400w ballast?
you could put a 600w HPS light into a 400w HPS ballast but you would only get 400w of power.
How long do magnetic ballasts last?
According to the Certified Ballast Manufacturers Association, the average magnetic ballast lasts about 75,000 hours, or 12 to 15 years with normal use.
What happens if you wire a ballast wrong?
If the ballast is bad, then the needle won’t move. If you’re using a digital multimeter, often the digital readout will possibly list a “1” when it doesn’t find a measurable resistance.