Categories :

How do you change a rear axle seal on a Chevy?

How do you change a rear axle seal on a Chevy?

To replace the seal, take the following steps:

  1. Jack up one side of your truck to take the weight off the wheel.
  2. Remove the wheel.
  3. Remove the axle shaft.
  4. Remove the hub retaining hardware.
  5. Slide off the hub and drum as a unit.
  6. Replace the seal behind the hub.
  7. Put everything back together in the reverse order of removal.

How much does it cost to replace a rear axle seal?

Fixing an axle seal can cost anywhere from $150 to several hundred dollars, depending on the make and model of your car. If you detect a leak it’s better to fix it sooner rather than later, as ruining your transmission is an expensive repair.

How much will rear axle seal cost 95 Chevy 1500?

Chevrolet Silverado 1500 Axle Shaft Seal Replacement Cost Estimate. The average cost for a Chevrolet Silverado 1500 axle shaft seal replacement is between $386 and $465. Labor costs are estimated between $303 and $383 while parts are priced at $83.

How serious is a rear axle seal leak?

An axle seal is the part of the vehicle that connects the axle to the rear differential, or the transmission. The purpose of the axle seal is to keep transmission fluid from leaking. If the leaking axle seal does not get fixed soon and the transmission is slipping, you could cause permanent damage to the transmission.

How much does it cost to fix a rear axle?

Rear Axle Repair Costs The cost of parts to repair an axle make up the majority of the cost and run from about $430 to $480 dollars. Labor on a rear axle repair is usually around $50 to $70.

How long does it take to replace axle seal?

Side 1 will take 45 minutes, side 2 will take 20. Also may want to bleed the rear brake lines if you’re not careful with capping them off when you remove the drum/axle assembly…

What happens if rear axle seal leaks?

An axle seal leaks more during highway driving, so the oil drops on the driveway may not always be present. As more fluid is leaked out, the transmission fluid level drops and the transmission will start slipping. If not caught in time, the transmission may even get permanently damaged.

Can you drive with a broken rear axle?

If one of your axles is broken, do not drive the car. It’s not safe. If you notice a bumping, clicking or grinding noise when going into turns, your axle isn’t broken yet, but it’s only a matter of time. When your axle fails, it’s possible that you’ll lose control of the car, possibly causing an accident or crashing.

Can a rear axle be repaired?

Q : Is a broken axle repairable? In most cases, replacement is the best way to fix a bent or broken axle. Patching up an axle crack or break is too risky, as it can fail while you’re driving.

Why do wheel seals fail?

The improper installation of wheel seals is the most common cause of wheel seal failure. 9 out of 10 times – Improper installation is the cause of wheel seal failure. First, correct application, your wheel seal needs to fit on the spindle or within the hub properly before actually installing it.