Is Chevy bringing back the S10 pickup?
The Colorado-based pickup truck, 2022 Chevrolet S10, is coming to the markets this year. Unfortunately, according to the manufacturer, the new truck will be only available for the South American markets.
Is there a Chevy S10 Blazer?
Starting with the 1995 second generation, the large Blazer was rebranded as the Chevrolet Tahoe, and these mid-size SUVs were simply launched as the ‘all-new Chevrolet Blazer’….Chevrolet S-10 Blazer.
| Chevrolet (S-10) Blazer / GMC (S-15) Jimmy | |
|---|---|
| Body style | 2-door SUV 4-door SUV |
| Layout | Front-engine, rear-wheel-drive / four-wheel-drive |
| Powertrain |
What was the first year of the S-10 Blazer?
1982
The S-10 pickup truck-based Blazer debuted in 1982 as a 1983 model offering an 83-horsepower 2.0-liter four-cylinder as a base engine for all states except California, which received a 1.9-liter engine with 82 ponies.
When did they stop making the S10 pickup?
2004
The fun ended in 2004 when Chevy officially discontinued the S-10. It was replaced with the Chevy Colorado.
Why was the Chevy S10 discontinued?
Chevrolet stopped building the S10 pickup truck in North America in 2004 because it had decided to replace it with a new model called the Chevy Colorado that was a direct replacement.
Is a Chevy S10 a good truck?
Best truck I’ve ever owned!!! Purchased this truck from a dealership in 2002 with 8,000 miles on it. It has been the most reliable truck I’ve ever owned. I purchased this truck as a commuter vehicle to keep the miles off of my Chevy Diesel. So far my Chevy S10 has over 250,000 miles on it, and it’s still going strong.
How much does a 1991 Chevy S10 Blazer weight?
3427 lbs.
Used 1991 Chevrolet S-10 Blazer Specs & Features
| Dimensions | |
|---|---|
| Curb weight | 3427 lbs. |
| Ground clearance | 6.9 in. |
| Height | 62.6 in. |
| Length | 176.8 in. |
How much does a 1988 S10 Blazer weight?
As for its exterior dimensions, it measured 178 inches in length, 65 inches in width and 61 inches in height with a 108-inch wheelbase. Curb weight varied at a range of about 2,500 to 3,000 lbs., depending on trim and transmission.
What was before the Chevy S10?
Together, these pickups are often referred to as the S-series. In North America, the S-series was replaced by the Chevrolet Colorado, GMC Canyon, and Isuzu i-Series in 2004. The S-Series ended production in Brazil in 2012, being replaced by the Chevrolet Colorado, but still with the name S-10.
Is a Jimmy the same as a Blazer?
The idea behind the GMC Jimmy was to be an upscale corporate twin of the Chevy Blazer. Many GMC vehicles fulfill this spot in the market, being luxury-oriented versions of Chevy machines. As a result, the Jimmy shared the Blazer drivetrain and many other elements.
Are Chevy S10 Reliable?
It has been the most reliable truck I’ve ever owned. I purchased this truck as a commuter vehicle to keep the miles off of my Chevy Diesel. So far my Chevy S10 has over 250,000 miles on it, and it’s still going strong.
How much does a Chevy S-10 Blazer cost?
A: The average price of a Chevrolet S-10 Blazer is $8,324. Q: When was the Chevrolet S-10 Blazer produced? A: The Chevrolet S-10 Blazer was sold for model years 1983 to 2005.
When did the Chevy Blazer come out in the US?
GMC S-15 Jimmy 2-door Chevrolet introduced the S-10 Blazer in 1982 along with its rebadged variant, the GMC S-15 Jimmy, and S-10 pickup truck, the latter replacing the Isuzu -based Chevrolet LUV. The Blazer and Jimmy appeared as 1983 models.
What kind of engine does a Chevy’s 10 blazer have?
1991 Chevy S-10 Blazer, sbc V-8, with 700 overdrive, 410 rear end, 12 bolt with slapper bars. Has long tube hedman hedders with exhaust dropping off at rear end. Has new aluminum 3 core radiator, new aluminum high flow water pump, new aluminum alternator brackets, new 600 holley, new aluminum fabricated valve covers, shown with the old ones.
What kind of brakes does a S10 Blazer have?
From at least 1991 onward, all S10 Blazers and Jimmies came with four-wheel anti-lock brakes as standard equipment. The first two years of the ABS system had axleshafts with pressed-on ABS toner rings, which were eliminated during the latter half of the 1993 model year (rear ABS control was now done via the vehicle speed sensor).