Categories :

How do I setup my Zhone wireless router?

How do I setup my Zhone wireless router?

ZHONE Router Settings

  1. Open the default web server by typing the following URL: 192.168. 1.1.
  2. Select configuration > wireless> security.
  3. Username is user and password user in lowercase.
  4. Chosse type of security (WPA2- psk).
  5. Enter the desired password ( 8 Characters).
  6. Press on Apply changes to save settings.

How do I reset my 192.168 1.1 router?

  1. Open up a web browser and type in the IP address of the ADSL Router (default is 192.168. 1.1). Press Enter.
  2. Enter the Login name and password (default is admin/admin).
  3. Click on the Tools tab at the top.
  4. Click on the Restore button to factory reset on the unit.

How do I setup my WAN router?

Power on your router and computer first and then modem.

  1. Log into the router’s web-based management page.
  2. Configure WAN Connection Type.
  3. Enter your PPPoE username and password which are provided by your ISP.
  4. Click Save to save your settings, then the router will connect to Internet after a while.

How do I access my router settings Consolidated Communications?


  1. Click on Internet Explorer , Firefox , or Safari .
  2. In the Address or Location bar type and click the Go button or hit the enter key on your keyboard.
  3. After clicking the go button/enter key you will be prompted for a user name and password.

How do I change my 192.168 1.1 password?

To change your router’s password:

  1. Enter your router’s IP address into your favorite web browser.
  2. Log in with the default username and password (both admin, usually).
  3. Go to settings.
  4. Select Change Router Password or a similar option.
  5. Enter the new password.
  6. Save the new settings.

Why can’t I log into my router?

If you still can’t log into your router’s firmware, you’ll need to reset the device to revert all settings back to their defaults. You’ll usually find a small reset button on your router. You should now be able to log into your router using the default username and password.

Do I plug Ethernet into WAN or LAN?

The LAN ports are designed for connecting to local devices. Plug one Ethernet cable into your modem and the other end into your router’s WAN port. Then, plug your router’s power adapter into the wall.

Is it better to use static IP or DHCP?

DHCP makes the most sense for trade shows and expos. The answer is simple. If no one on your tech team specifically told you that they require a static IP address, you probably don’t need one. In other words, if you just need to plug your computer, printer, smart device, etc., into the switch, you need DHCP.

How do I reset my Consolidated router?

Close all running programs, and shut down your computer. If you are connected through a router unplug its power cable. Locate the High-Speed Internet modem or TV gateway and follow the power cord to the electrical outlet. Unplug the power adapter from the electrical outlet and wait for 10 seconds.

Where to find Zhone bridge and router installation sheets?

If you are looking for current versions of Bridge and Router Technical Manuals, click here . Note: The 610, 620, and 1020 Installation Sheets are not designed for online viewing. Print them and fold them in thirds to use them as intended.

How to set up Blink-Blink for home?

How to Set Up Blink 1 Setup Sections. 2 Enter the PIN from the email we sent you and tap “Verify”. 3 Next, you are presented with a Phone number entry screen. 4 Note: The SMS text option should only be used with mobile phone lines and will not work with landlines.

How does Blink connect to the sync module?

The Blink app needs to connect to the Sync Module’s Wi-Fi network. It is named “BLINK-” followed by four digits from the Sync Module Serial Number. Tap Join, then you are asked to join your local Wi-Fi network. 7.

Where do I find Blink on my iPhone?

1. From the home screen, tap the Add Device + icon. 2. The Add Device screen displays your device options. Blink wireless camera system – A system contains a Sync Module and Blink Outdoor, Indoor (2nd Generation), XT2, XT, or 1st Generation Indoor camera.