How much does chlorinating a well cost?
To disinfect your well and eliminate the bacteria, you should chlorinate the well. You can hire a company that services wells to do the chlorinating. The cost ranges from $80 – $200.
How long should you wait to use water after you chlorinate a well?
At least 24-hours after the chlorination process run your garden hose outside but in a safe area. If your well is a low production well, then keep the water running for an hour or two. As long the water keeps flowing, it will not damage your pump.
Can you chlorinate your own well?
Mix 2 quarts bleach in 10 gallons of water; pour into well. Connect a garden hose to a nearby faucet and wash down the inside of the well. Open each faucet and let the water run until a strong chlorine odor is detected, then turn it off and go to the next one. Don’t forget outdoor faucets and hydrants.
Does chlorinating a well work?
Shock chlorination is NOT a recommended method for treating recurring bacteria problems. The source(s) of such contamination should be identified and eliminated by a licensed well driller/contractor. Another option is to install a continuous disinfection treatment system.
How often should you chlorinate your well?
Homeowners with private wells should have their well water tested every 3 to 5 years for some contaminants, including bacteria. If these tests turn up positive for bacteria, chlorinating the well may be a way to resolve the problem.
How long does it take for water to clear after shocking a well?
It will usually take 4 to 8 hours to flush the well after a standard well chlorination. The water may become discolored during flushing because the chlorine may have loosened the hard water deposits in the plumbing. Caution: The chlorine must be completely flushed from plumbing system.
Can you put too much bleach in a well?
Do not use excessive amounts of bleach – more is not more effective. 5) For best results the bleach should be combined with water before adding it to the well. [By reducing the concentration there is less chance of corrosion of the cables and pipes in the well.
How fast does well water replenish?
The well’s size, the type of geology the well is in, and the condition of the well all factor into the recovery rate of a water well. Recovery rates can vary from a fraction of a gallon per minute to more than ten gallons per minute.
Can I pour hydrogen peroxide in my well?
From time to time, it may be desirable to use hydrogen peroxide to decontaminate the entire well because some of the odor-causing bacteria also produce sulfuric acid, which will corrode the pump in the long run. Some of the iron bacteria can also produce a musty, fishy or oily smell in the water.
Can I put too much bleach in my well?
How much bleach should I pour down my well?
Bleach should not be put into the well straight from the bottle. The general recommendation is to dilute the laundry bleach 1:100, (one gallon of bleach to 100 gallons or water; half a gallon of bleach to 50 gallons of water; a quart of bleach to 25 gallons of water.)
Does rain fill your well?
While your well is a 6” hole in the ground, it is not directly replenished by rainfall, as you might expect a cistern to function. With less rain, or changes in aquifer structure, the well becomes non-water bearing – i.e. dry. Your well may not ‘fill up’ when it rains, but it does reap the indirect benefits.