Can you have a 2-way dimmer?
If you have a 2-way circuit (where the same lights are controlled by two switches) you must choose a push-on/push-off dimmer and replace one of the switches with that dimmer. You can only use one push-on/push-off dimmer in a 2-way circuit.
Can you put two dimmer switches side by side?
Dual dimmer switches can control two separate lights or a fan and light combination. A dimmer switch for a fan must conform to power load rating specified by the manufacturer. Lutron Electronics makes dual dimmer switches that fit inside a single box. Enjoy the convenience of operating two dimmers from the same box.
Can you have 2 dimmers on a 4 way switch?
Correct, no 4 way dimmers. The 3 way must be at either end of the switch legs, whatever it takes. If the dimmer is desired in a location where only a 4 way switch makes sense, the only solution is to extend the power and double back the switch legs so that it becomes the “end”.
What does 2 way dimmer switch mean?
2 way means there’s another switch controlling the same light. You can turn your lights on or off from two places, for example both at the top and bottom of your stairs. 2 way light switches are also great for large rooms with two doorways where you want to control lights both coming in to, and out of, the room.
How does a 2 way dimmer switch work?
In a two-way installation, as shown in figure 2, only one dimmer must be used. A standard 2-way switch must be used for the other position. With the push on/push off type of dimmer, as long as the rotary control knob is not turned, when it is pressed, the dimmer will switch on at the previously set light level.
Can you have two dimmer switches on a 3-way?
When using a 3-way dimmer switch, you should only have one dimmer on the circuit. The other switches (you can have more than one) must be on-off switches only. The other light switches turn the lights off and on to the level set by the dimmer.
Do dimmer switches require special wiring?
Remember: Dimmer switches don’t work on most fluorescent fixtures, and low-voltage lighting requires special low-voltage dimmers. Remove the wires from the old switch. Dimmer switches are usually connected to the house wiring by short lengths of wire coming out of the switch body rather than by screw terminals.
What is a Shelly dimmer?
Dimming without a neutral line Shelly Dimmer 2 can be used in houses where the neutral line is missing and provide a full set of dimming functionalities. You can control a wide range of halogen lights, dimmable LED and ferromagnetic transformers.
Can you have a 3 way dimmer switch?
With a three-way dimmer, you can control a light with two switches. You will need a three-way dimmer and a three-way switch. This lets you dim from one location and turn the lights on and off from another. If two switches control a single light or a group of lights, you will need a three-way dimmer.
What is the difference between a one way and a two way dimmer switch?
1 way is an on/off switch and means there’s only one place you can turn your light on or off. This is the most common kind of switch found in most homes. Most 2 way switches can also be used as a 1 way on/off switch. 2 way means there’s another switch controlling the same light.
How do you set up a three way dimmer?
Use a voltage tester or turn the switch on and off to ensure that there is no power. Next, set up the three-way dimmer switch wiring. You’ll notice four colored wires: red, white, black and green. In some systems, the green wire might be copper or brown.
Can A decora dimmer be dimmed from more than one location?
The Decora Rocker Slide Universal Dimmer can only be dimmed from a single location and turned ON and OFF from the second location (to the current dim level). If you require the ability to dim from multiple locations please see the Decora Digital line of controls.
What do you need to know about Leviton Universal dimmers?
Leviton Universal Dimmers feature an easy to use selector switch for choosing bulb applications. It is pre-configured to the LED/Incandescent mode which is optimized for a wide range of LED applications. In CFL mode the dimmer provides a “kick start*” feature for harder to start bulbs.
Is the decora rocker slide Universal dimmer locator light?
The Decora Rocker Slide Dimmer DSL06 is available with a 300W (2.5A) LED load rating. The DSM10 Decora Dimmer has a 450W (3.75A) load rating. Does the Decora Rocker Slide Universal Dimmer have a locator light?